Saga-midi

Saga-midi Saga-midi Features

Features

top ↑
  • Noise reduction 47 dB peak
  • Defined values for noise reduction and temperature control
  • 19” system, fast installation, tempered glass door
  • Full choice of interior design, extensive accessories
  • Colors: Sides and interior, light grey RAL7035, doors, greyish white RAL9010
  • Exterior dimensions 600X1360X800 (width/height/depth)
  • Usable height 18 HE

Equipment

top ↑

Available options:

  • Temperature readout in upper cabinet space
  • Fan speed control
  • Warning message for excessive temperature
  • Acoustical alarm

Extensive accessories available, including axel and castor rollers, equipment supports, telescoping pull-out hardware, cable fasteners, etc.

Accessories List

Downloads

top ↑

Product comparison

top ↑
Model Head load Noise attenuation HU
Saga-midi 1,1 kW 47 dB 18
Saga-midi XL 1,1 kW 47 dB 32
Saga-midi XXL 1,1 kW 47 dB 37
Saga-maxi V3 0,8 kW 41 dB 34
Saga-maxi plus V3 1,2 kW 41 dB 34
Saga-klima mk II ca. 2kW 47 dB 40
Saga-klima plus mk II bis 3kW 47 dB 40

Description

Saga-midi lowers the noise emanating from any installed equipment extremely well, to the point where the requirements of workplace regulation (GK 15/DIN 15996) are properly complied with. The noise difference with Saga-midi, compared to an instrument in the open, corresponds to a hearing distance of 50 centimeters (with Saga-midi) to more than 20 meters (instrument in the open).

Saga-midi has a cleverly thought-out fan system. As a result, high heat levels can be tolerated depending on the temperature of the room. The fan noise falls below the GK 15 standard, even at top speed. To achieve this result two long-life, high-performance fans are used. As an option, one can regulate the fan speed depending on the temperature in the cabinet. In that manner, any self-generated noise can be further reduced.

With Saga-midi computer installations, harddisk stations, or noise intensive equipment may be situated in close proximity to the work place. Saga-midi saves costly installation of equipment in other rooms, as well as the use of long cable channels. Cable exit ports are located at the base of the cabinet, allowing cables to be routed to the back or in the sides of the cabinet.

The equipment is always in view through the generously large tempered glass door. Saga-midi is insensitive to age, looks good, and withstands the passage of time through its practical construction. Saga-midi is delivered fully assembled. Mounting hardware and load bearing rails are included.

Saga-midi was developed together with the IRT as a cabinet with special noise attenuation parameters and ultra quiet ventilation. Saga-midi reduces emitted disturbing noise up to 47 dB at peak.

The parameters for noise attenuation were targeted at the sound spectrum and designed for sensitive hearing conditions. The attenuation of noise works equally well in all directions. With Saga-midi installed in a typical TV edit suite, the analysis pursuant to DIN 45631 (Zwicker-method) resulted in a decrease in experienced loudness to the 19th degree when compared with an open installation. In practice, even a disturbingly noisy source, for example a workstation, sounds quieter than the others in the range of predominant sounds. Besides being acceptable vis-à-vis workplace requirements-including those of the EU-a considerably higher concentration level is achieved by the working person.

Saga-midi has two high-performance fans which provide for outstanding heat dissipation. With a room temperature of 22° C and allowable workstation operating temperature of 40° C the dissipation of approximately 1,100 Watts can be achieved. With such results one may safely operate very warm computer installations as well.

If needed, Saga-midi can be equipped with a space cooling system. For this we are pleased to deliver construction suggestions and to-scale sketches. For even heavier thermal loads, or for operating in higher temperatures, the actively cooled Saga-klima mk II is recommended.

Naturally, in answer to questions about all our products, you receive detailed technical drawings and competent advice.

DBGM notice – Technical data and details are subject to change without prior notification.