Saga-maxi plus V3

Saga-maxi plus V3 Saga-maxi plus V3 Features

Features

top ↑
  • Noise reduction 41 dB peak
  • Defined values for noise reduction and temperature control
  • 19” system, fast installation, tempered glass door
  • Full choice of interior design, extensive accessories
  • Colors: Sides and interior, light grey RAL9002, doors, greyish white RAL9010
  • Exterior dimensions 800 x 2185 x 800 mm (WxHxD)
  • Usable height 32 HE
  • LED Display for temperatur, running parameters and occurring disturbances

Equipment

top ↑

Available options:

  • Temperature display in upper cabinet space
  • Fan speed control
  • Warning message for excessive temperature
  • Acoustical alarm

Extensive accessories available, including Programmer, GPI-Box, 232-Box, axel and castor rollers, equipment supports, telescoping pull-out hardware, cable fasteners, etc.

Accessories List

Downloads

top ↑

Product comparison

top ↑
Model Head load Noise attenuation HU
Saga-midi 1,1 kW 47 dB 18
Saga-midi XL 1,1 kW 47 dB 32
Saga-midi XXL 1,1 kW 47 dB 37
Saga-maxi V3 0,8 kW 41 dB 34
Saga-maxi plus V3 1,2 kW 41 dB 34
Saga-klima mk II ca. 2kW 47 dB 40
Saga-klima plus mk II bis 3kW 47 dB 40

Description

Saga-maxi plus V3 lowers the noise emanating from any installed equipment extremely well, to the point where the requirements of workplace regulation (GK 20/DIN 15996) are fully complied with. The noise difference with Saga-maxi plus V3, compared to an instrument in the open, corresponds to a hearing distance of 50 centimeters (with Saga-maxi plus V3) to more than 23 meters (instrument in the open).

Saga-maxi plus V3 comes standard with two durable, high performance fans. Optionally, fan speed can be regulated depending on the temperature in the cabinet. As a result, internal noise can be reduced even further. With Saga-maxi plus V3 computer installations, hard disk stations, or noise intensive equipment may be situated in close proximity to the work place.

Saga-maxi plus V3 saves costly installation of equipment in other rooms, as well as the use of long cable channels. Cable exit ports are located at the base of the cabinet, allowing cables to be routed to the back or in the empty space in the sides of the cabinet. The equipment is always in view through the generously large tempered glass door.

Saga-maxi plus V3 is insensitive to age, looks good, and withstands the passage of time through its practical construction. Saga-maxi plus V3 is delivered fully assembled. Mounting hardware and load bearing rails are included.

Saga-maxi plus V3 was developed together with the IRT as a cabinet with special noise attenuation parameters and ultra quiet ventilation. Saga-maxi plus V3 reduces emitted disturbing noise up to 40 dB at peak. The parameters for noise attenuation were targeted at the sound spectrum and designed for sensitive hearing conditions. The attenuation of noise works equally well in all directions.

With Saga-maxi plus V3 installed in a typical TV edit suite, the analysis pursuant to DIN 45631 (Zwicker-method) resulted in a decrease in experienced loudness to the 28th part when compared with an open installation. In practice, even a disturbingly noisy source, for example a workstation, sounds quieter than the others in the range of predominant sounds. Besides being acceptable vis-à-vis workplace requirements - including those of the EU - a considerably higher concentration level is achieved by the working person.

Saga-maxi plus V3 has two high-performance fans which provide for outstanding heat dissipation. With a room temperature of 22° C and allowable workstation operating temperature of 40° C the dissipation of approximately 1,200 Watts can be achieved. With such results one may safely operate very warm computer installations as well.

If needed, Saga-maxi plus V3 can be equipped with a space cooling system. For this we are pleased to deliver construction suggestions and to-scale sketches. For even heavier thermal loads, or for operating in higher temperatures, the actively cooled Saga-klima mk II is recommended.

Naturally, in answer to questions about all our products, you receive detailed technical drawings and competent advice.

DBGM notice – Technical data and details are subject to change without prior notification.